Mixer Seals

Product Details:

SSDB-E3 Seals Employ Dual Balanced Multi Spring Seals With Dynamic 'O' Ring Of Bigger Cross-Section For Higher Reliability. Seal Ring Is Of Heavy Duty Design And Stationary Face Is Hydraulically Balanced To Avoid Accidental Pop-Up.
Features:

• Dry/Wet Running Option
• For Vessel Pressure Upto 6 Bar
• Un-Pressurised Sealant
• Cartridge Construction
• Gmp Option Available
• Extended Service Life

Applications:

• Reactors
• High Vacuum Applications

Product Details:

Hi-Fab Dry Running Single Seals Type SSDB-E2 Can Replace Conventional Gland Packing Effectively And Economically. An Innovative Seal Setting Collar Simplifies The Installation Even On Large Diameter Shafts. Hydraulically Balanced Stationary Face Is Free From Any Clamping Stresses Which Cause Leakage During Start-Up. The Seal Can Tolerate Large Radial Run Out.

Features:

• Economic Alternative To Gland Packing
• Dual Balanced Seal Design
• Pressure Balanced Seat With No Clamping Stress
• Self Lubricating Faces
• For Vessel Pressure Upto 6 Bar
• Gmp Version Available
• Innovative Seal Setting Mechanism

Applications:

• Top Entry Agitator
• Pharma Reactor
• Fermentors
• Multimills
• Rotocon Dryers

Product Details:

SSDB-E4 Seals Are Dry Running Retrofit Seals Meant For Quick Conversion Of Old Gland Packed Agitators. Because Of Stationary Spring Design It Can Tolerate Out Of Square Pad Flange. Since There Is No Closely Fitting Sleeve, The Seal Can Be Installed Easily On Worn Out Shafts. SSDB-E4 Seals Can Also Be Retrofitted On Glass Lined Reactors.

Features:

• For Quick Conversion From Gland Packing
• For Worn-Out Shaft
• Can Tolerate 3. 8 Mm Shaft Runout / Eccentricity & Out Of Square Pad Flange
• Low Headroom Required
• Can Be Easily Adopted To Fit On Any Existing Pad Flange
• Steam Sterillization Option Available

Applications:

• Fermentors
• Horizontal Mixers
• Gland Packed Reactors
• Glasslined Reactors

Product Details:

Features:

• Inboard Seal Designed To Handle Slurry
• Can Be Used For Higher Speeds
• Integral Pumping Ring Option
• Guided Sealant Flow For Better Heat Dissipation
• Special Design For Floating Shafts With Linear Expansion
• Available With / Without Bearing

Applications:

• Flooded Reactors
• Top & Bottom Entry Agitators
• Lump Breakers & Choppers
• Horizontal Reactors & Mixers
• Grinding Mills
• Agitated Filter Dryers
• Pc Autoclaves

Product Details:

Features:

• For High-Pressure Low-Speed Autoclaves
• Dual Balanced Seals With Auto-Reversal For Maximum Safety
• Cooling Jacket A Standard Feature
• Hydraulically Balanced & Stress-Free Stationary Faces
• Split Clamping Avoids Shaft Damage

Applications:

• High-Pressure Autoclaves

Product Details:

Features:

• Spring Stationery Design For High Speed
• Minimum Fretting & Vibrations
• Independent of Pad Flange Squareness And Thermal Distortions Of The Equipment
• Safe & Secure Split Clamps For Torque Transmission
• Dual Balanced Heavy Duty Seal With Auto-Reversal For Maximum Safety

Applications:

• Gas Induction Reactors
• High-Speed High-Pressure Autoclaves

Product Details:

HCAX seals are Double Coaxial Retrofit Seals which require very low headroom and can tolerate large shaft run-outs. They are used as retrofit seals for quick conversion of gland packing on reactors handling toxic and hazardous media.

Product Details:

Features:

• Metal Free Contact Parts
• Pressurised Sealant
• Cartridge Construction

Options:

• SiC/SiC Faces At Inboard
• Integral Bearing

Applications:

• Glass / Polymer Lined Reactors
• Cladded Reactors
• Hazardous / Toxic Applications

Product Details:

HI-FAB is one of the largest manufacturers of Seals For Agitated Nutsche Filters. HI-FAB design is innovative and departs from other conventional designs for better seal life. These seals are continuously in operation for more than five years at many plants in India, Europe & America. HI-FAB ANF seals have been successfully used on horizontal reactors and mixers with expanding shafts.

Product Details:

Features:

• Metal Free Contact Parts
• Reverse Balanced
• Dry/Wet Running Option
• Upressurised Sealant
• Cartridge Construction

Options:

• Sic/Sic Faces At Inboard
• Integral Bearing

Applications:

• Glass / Polymer Lined Reactors
• Cladded Reactors

Product Details:

Features:

• Reliable Design, Proven Track Record
• Pressurized Sealant
• Factory Tested Cartridge Construction
• Available With/Without Bearing
• Available In Double Dry Version For Sterile Applications
• Jacketed Housing

Applications:

• Top Entry Agitators
• Moderate Pressures
• Multipurpose Reactors